|
Mission Statement Our Mission is to utilize the energy found in permanent magnets to service humanitarian enterprises. Our goal is to supply low-cost power to charitable organizations and individuals in third world, undeveloped countries where power is expensive or unavailable. |
|
We at Mission: Magnetics LLCTM exist to further the reach of the Gospel and offer humanitarian support by providing cutting edge technology. We have been endeavoring to develop and distribute two units, a motor and a generator, that operate on the energy derived from powerful In 2000, Arlen Davis was providentially introduced to an individual who was developing an innovative electric Other humanitarian organizations we will partner with are ADRA, Gospel Ministries International, ACTS Disaster Response, Water for Life, Search For One Inc. Whether our PM Motor is coupled to a generator or stands alone, there are many applications for it. From supplying mechanical power to run boats, vehicles, and light aircraft to supplying electrical power to hospitals, clinics, and schools, running electrical equipment, operating evangelistic/medical vans, our primary reason for being is to facilitate the spreading of Jesus' love through supporting established entities or allowing new ones to be born. When the motor is coupled with the generator(s) it will supply ample stable, quiet power for any event, cheaply! Our desire is to see Jesus return as soon as possible and we believe that our technology can facilitate His soon return.
A high-efficiency generator using permanent magnets in the rotor has been developed. It is a 24 kW, 120/240 volt, 50/60hz unit, weighing about 100 lbs. Early on, engineers told Arlen that a powerful generator lacking metal cores in the coils would not work since its energy transfer would be limited and the current and voltage output would be very low. Arlen went ahead and developed his innovative coreless coil and armature design with all-plastic materials and number 14 wire in the coils. He got 20 amps at 60 volts from each coil at 1700 rpm, more than full load for a number 14 wire! Engineers commented that the energy transfer is incredible, surpassing anything available! The current output (20 amps) remains available at all speeds/voltages above Now, a lightweight but powerful, all-permanent magnet motor is in the developmental stage. We've learned a lot from our first two prototypes and are anticipating the next one to operate as designed. From what we've learned so far, our motor should easily drive up to four of these 24 kW generators, giving a total output of 96 kW of electric power! Very little - to no heat is produced by the generator and the motor should produce no heat at all. And together, we expect they will produce no more noise than an electric motor of equivalent or smaller size.
This project is in urgent need of funds to get it to the next stage of development. We invite your prayers if you share Mission: Magnetics' dream. Together we believe that Mission: Magnetics has come about for such a time as this. To see how you may help us, please see the Product & Company Information page.
|